Seagull Models Ryan Navion Especificações

Made in Vietnam.RYAN NAVIONASSEMBLY MANUALKit features.• Ready-made—minimal assembly & finishing required.• Ready-covered—including decals, trim

RYAN NAVION Instruction Manual.10 3) Install the muffler and muffler extensio

11www.seagullmodels.comEpoxy.Balsa block.Epoxy.M3 x 15mm.M3 x 15mm.Battery.Speed control.Electric motor.135mm.4mm.

RYAN NAVION Instruction Manual.12INSTALLING THE SWITCH.3/ 32” Hole.THROTTLE SER

13www.seagullmodels.comServos.Small weight.Thread.String.Small weight.Electric wire.INSTALLING THE AILERON - FLAP SERVOS.Flap servo.Aileron Servo.Swit

RYAN NAVION Instruction Manual.14PUSHROD FLAP INSTALLATION.M2 lock nut. Repea

15www.seagullmodels.comMAIN LANDING GEARINSTALLATION.INSTALLING THE MAIN GEAR WIRES.M3x15mm.2.3.4.5.1.1.2.3.4.5.Wheel.Wheel collar.

RYAN NAVION Instruction Manual.16INSTALLING VERITICAL FIN.Hinge.Epoxy.Trim and

17www.seagullmodels.comCut.Fill epoxy.ELEVATOR - RUDDER PUSHROD HORNINSTALLATION.Elevator control horn.Rudder Control horn.Rudder pushrod.Hinge.Metal

RYAN NAVION Instruction Manual.18Tighten the antenna.INSTALLING THE BATTERY-REC

19www.seagullmodels.comBALANCING. 1) It is critical that your airplane be bal-anced correctly. Improper balance will causeyour plane to lose control

RYAN NAVION Instruction Manual.2INTRODUCTION.Thank you for choosing the RYAN NA

RYAN NAVION Instruction Manual.20 7) Check the receiver antenna. It shouldbe

3www.seagullmodels.comNOTE: To avoid scratching your new aero-plane we suggest that you cover yourworkbench with an old towel. Keep acouple of jars or

RYAN NAVION Instruction Manual.4HINGING THE RUDDER. Glue the rudder hinges i

5www.seagullmodels.com Aileron control horn: See pictures below.AILERON CONTROL HORN2 sets.3x40mm.Install the wing edge to the wing.ALUMINUM WASHER.

RYAN NAVION Instruction Manual.6 Install the flap control horn using the sameme

7www.seagullmodels.com Rudder control horn:Using the same techniques used aileroncontrol horn. See picture below.RUDDER CONTROL HORN.1 sets.Fuselage

RYAN NAVION Instruction Manual.8 5) With the stopper assembly in place,the wei

9www.seagullmodels.com 2) Place your engine onto the enginemount. Adjust the engine is centered of theedges of the engine case. 3) When you are s